Lowrance electronic iFINDER M-M - Manual (Page 50)

44
4. 5. 6.
Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp
turn. Fig. 5. Waypoint (4) set at highway exit to frontage road leading
to river. Waypoint (5) ends the route at a tree stand in the hunting
area. Fig. 6. Press EXIT to save the route and you return to this screen.
5. Move the cursor to the next point in the route, a spot where you need
to turn or change direction, and press
ENT to set the next waypoint.
6. Repeat step five until the route reaches your destination.
7. To save your route, press EXIT . iFINDER reverts to the Route screen,
with the route automatically named "Route 1" and stored in iFINDER's
internal memory.
8. You can edit the name if you wish. Press
↑ to select the screen's
command box, then press
→ to
E
DIT
N
AME
| ENT . Press
↑ or ↓ to change
the first character, then press
→ to move the cursor to the next charac-
ter and repeat until the name is correct, then press ENT .
9. You can execute other route commands, such as N AVIGATE
. With the
command box active, just press
→ to highlight a different command,
then press ENT .
10. If you are finished with the route for now, yo u c a n r e t u r n t o t h e
l a s t p a g e d i s p l a y e d b y p r e s s i n g
EXIT | EXIT | EXIT .
Delete a Route
1. Press
MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .
2. Press
↓ to the route list|↓ or ↑ to select route name|
ENT .
3. Press
← to
D
ELETE
| ENT |
← to
Y
ES
| ENT .
Save GPS Data Files to an MMC
1. Press MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT |
↓ to
T RANSFER M Y
D ATA
| ENT .
2. The Transfer My Data menu includes a message which tells you if an
MMC is present. If no MMC is present, you must first insert a card into
iFINDER in order to activate the Save command.
offered by www.Busse-Yachtshop.de email: [email protected] Tel: +49 (0)4347 908234