Lowrance electronic iFINDER M-M - Manual (Page 51)

45
3. To save data from iFINDER to the MMC: press ENT (for S AVE
).
4. To accept the default name "Data" for the GPS Data File, press
↓ to
S AVE
| ENT . (If you wish to rename the file, press ENT to activate the se-
lection box. Press
↑ or ↓ to change the first character, then press → to
the next character and repeat until the name is correct. Then, press
ENT |
↓ to
S AVE
| ENT .)
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, press
EXIT | EXIT | EXIT .
Searching
Now that you've seen how iFINDER can find where you are, let's search
for something somewhere else. Searching is one of the most powerful
new features in the Lowrance GPS product line.
In this example, we'll look for the nearest fast-food restaurant. For more
information on different types of searches, refer to Sec. 6, Searching.
NOTE:
This example requires the Point of Interest (POI) database included
with a FreedomMap or a high-detail MapCreate custom map.
After iFINDER has acquired a position:
1. Press
FIND |
↓ to
M AP P LACES
| ENT |
↓ to
POI-R ESTAURANTS
.
2. You could search the entire restaurant category, but in this example
we will narrow our search. Press
→ to
F
AST
F
OOD
C
HAINS
| ENT|ENT.
At left, the Category Selection menu,
with a list of the nearest restaurants at right.
3. iFINDER says it is calculating, then a list of restaurants appears,
with the closest at the top of the list, and the farthest at the bottom of
the list. The nearest is highlighted.
offered by www.Busse-Yachtshop.de email: [email protected] Tel: +49 (0)4347 908234