Lowrance electronic iFINDER M-M - Manual (Page 56)

50
2. Press ENT | ENT . The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map.
Create Waypoint at Current Position
1. While you are traveling, press ENT | ENT . The waypoint is saved and
automatically given a name with a sequential number, such as "way-
point 002." The waypoint symbol and number appear on the map.
Create a Man Overboard Waypoint
This unit has a man overboard feature that shows navigation data to
the location where the feature was activated. To activate it, press the
ZOUT and ZIN keys at the same time. Your position at the time these
keys are pressed is used as the man overboard position. The unit auto-
matically begins navigating to the MOB waypoint. For further details,
read the discussion of the Man Overboard feature under the heading
"Navigation" earlier in this section.
Create a Waypoint by Average Position
This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position
accuracy by helping to eliminate errors caused by atmospheric condi-
tions and other factors.
1. Press ENT |
↓ to
A
VERAGE
P
OSITION
| ENT |(cursor jumps to highlight
C
REATE
)| ENT .
2. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press
ENT to create and save the waypoint.
3. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT | EXIT or you can edit the waypoint.
Create a Waypoint by Projecting a Position
This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
lected from your waypoint list, a map feature or from the Points of In-
terest list.
1. Press ENT |
↓ to
P ROJECTED P OSITION
| ENT |(cursor jumps to highlight
C
REATE
)| ENT .
2. Press
↓ to
S ET R EFERENCE
| ENT . Use
↑ and ↓ to select a waypoint, map
feature or Point of Interest. When the point has been selected, press
ENT and the point's position appears as the reference position.
offered by www.Busse-Yachtshop.de email: [email protected] Tel: +49 (0)4347 908234