Lowrance electronic iFINDER M-M - Manual (Page 61)

55
At left, the MMC File Browser, with Card Info screen shown at right.
Com Port Configuration
iFINDER has one NMEA 0183 version 2.0 compatible communication
port, or com port for short. The Com Port Menu, which is accessed from
the System Setup Menu, allows you to configure the communications
port to send data to another electronic device, such as an autopilot.
Menus for changing Com Port settings.
For connectors and wiring information for another device, consult the
factory; phone numbers are in the back of this manual. To set Com Port
Configuration:
1. Press MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT .
2. Press
↓ to
C OM P ORT
| ENT .
Configure NMEA
You can configure the unit to use specific NMEA sentences.
offered by www.Busse-Yachtshop.de email: [email protected] Tel: +49 (0)4347 908234