Lowrance electronic iFINDER M-M - Manual (Page 85)

79
Track Smoothing
This is a factory setting that should always be left on. When stopped or
traveling at slow speeds (such as walking or trolling), Track Smoothing
prevents wandering of trails, the steering arrow, compass rose and a
map in track-up mode.
Trail Options
There are several options you can use with trails. Some affect all trails,
other options can be applied to a particular trail. You can change the
way trails are updated, you can display or hide trails, make them flash
on the screen or not flash, create a new trail, delete a trail, etc.
General Trail Options
To access the Trails Menu:
1. Press MENU | MENU |
↓ to
M Y T RAILS
| ENT | ENT .
At left, the Trails Menu, with Trail Options shown right.
Delete All Trails
To remove all of the trails from memory: from the Trails Menu, press
→
to D ELETE A LL
| ENT |
← to
Y ES
| ENT .
Flash Trails on Screen Option
Press
↓ to
F LASH T RAILS
. With the option highlighted, press ENT to check
it (turn on) and uncheck it (turn off.)
Update Trail Option
This menu lets you change the way the trail updates occur.
offered by www.Busse-Yachtshop.de email: [email protected] Tel: +49 (0)4347 908234