Three easy steps to coding – Lifescan SureStep User Manual
Page 21
10
Code numbers are used to calibrate
the SureStep
®
Test Strip with
the SureStep
®
Meter for accurate
results. You must code the meter
before using it for the first time.
You must check the code every
time you change to another package
of test strips. Check that the code
number on the display matches
the code number on the test
strip package.
Caution: If the code numbers
do not match, you may get
inaccurate results.
Three Easy Steps to Coding
Step 1: Turn On the Meter.
Press the blue power button. After
the display check, the result from
either your last blood glucose test
with date or your last control
solution test will appear.
If you are turning on the meter for
the first time,
will appear on
the display.
AM
PM
C O D I N G T H E M E T E R
(Example)
CODING
LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:02 PM Page 10