Lifescan SureStep - Manual (Page 61)

Step 4: Replace the Test
Strip Holder.
Slide the test strip holder into
the meter, press down, and push
forward at the test strip insertion
point until you hear a click. Make
sure the test strip holder is firmly
in place. Make sure it does not
extend beyond the meter.
Note: You can clean the outside of
the meter by lightly wiping it with
a damp cloth.
Turn on the meter.
MAINTENANCE
50
LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:03 PM Page 50