Lifescan SureStep User Manual
Page 72
Advertising
61
SETTINGS
You will hear a three-tone beep
when
is displayed. Press the
blue power button to move to
the 14- and 30-day test averages
setting.
14- and 30-Day Test Averages
The meter is pre-set to display
14-day and 30-day averages of
your blood glucose test results
in memory mode.
To ensure accurate 14- and 30-day
blood glucose test averages, you must
mark control solution test results.
This will keep them from being
included in your blood glucose test
averages (see pages 16 and 17).
If you wish to turn the averages
off, press the green C button. The
following display will appear:
No average will be displayed in
memory mode. Press the blue
power button to move to the
time format setting.
LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:03 PM Page 61
Advertising