Lifescan SureStep - Manual (Page 40)

29
You have applied too much blood
to the test strip if the entire white
pad is soaked. You must begin the
test with a new test strip to avoid
false results from too much blood. Step 2: Check the
Confirmation Dot.
After a few seconds, look at the
confirmation dot on the back of
the test strip. If it is completely
blue, go on with the test.
TESTING
Too Much Blood
Front
Confirmation
Dot
Enough Blood
Front Back
LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:02 PM Page 29