Line 6 POD X3 Family - Manual (Page 26)

Getting Around, Tones & Tuner
2•4
2. Choose whether you want both Tones on at the same time, or just one Tone, by holding the Tone 2
button (POD X3 & POD X3 Pro) or the Tone 2 footswitch (POD X3 Live) for two seconds.
Dual tone on Dual tone off
HOLD
3. Tweak your Tones. From the Home Page, briefly pressing the Tone 2 button (POD X3 & POD X3 Pro)
or stepping on the Tone 2 footswitch (POD X3 Live) will toggle between controlling Tone 1 and Tone
2. When you’re on the one you want, you can select blocks, turn them on/off, tweak, and turn knobs as
described earlier.
Tone 1 name is inverted if Tone 1 is selected. Tone 2 name is inverted if Tone 2 is selected:
Edit Tone 1 (Home Page) Edit Tone 2 (Home Page)
From a block’s Edit Page, you can also press the Tone 2 button (POD X3 & POD X3 Pro) or step on
the Tone 2 footswitch (POD X3 Live) to toggle between that block for each Tone.
Edit Tone 1 (Edit Page) Edit Tone 2 (Edit Page)
Note: You can also use an optional FBV or FBV Shortboard to control Dual Tone functions, as referenced in
Steps 2 and 3 above. For details on setting this up, see Page 6•6.