Line 6 POD X3 Family - Manual (Page 31)

Getting Around, Tones & Tuner
2•9
Tuner
Press and hold the Tap button or footswitch for 2 seconds to enter tuner mode — shazam! Instant digital
chromatic tuner for Tone 1. The display will change to the following:
TUNER
REF AUDIO
BYPASS
50 50
E
440HZ
All Amp Model and effects processing are bypassed so you can hear those questionably-tuned strings clearly,
should you choose to do so.
Play a note on your guitar and you’ll see what note it is on that handy display; all half-step notes are displayed
as flats, so you’ll see A
b
instead of G
#
, for example. Play that string you’re trying to tune again, turn its tuning
key so the note goes sharp and then flat, and the little diamond will move to the right when it’s sharp and
back down to the left when it’s flat. When you’ve got it tuned just right, the little diamond will sit right in
the middle.
Ref – Want a different reference than A=440Hz? Turn the “Ref” knob to set the reference frequency
anywhere from 425-455 Hz. This setting is stored so you don’t have to reset it every time you turn on your
POD X3, POD X3 Live or POD X3 Pro.
Audio – Normally, the audio will be muted while you’re tuning, but if you prefer to hear yourself tune,
turn the Audio knob to toggle between Mute and Bypass.
Press the Tap button or footswitch and the tuner disappears just as swiftly as it came.