Line 6 POD X3 Family - Manual (Page 54)

Example Setups
5•4
5. Check your Master Volume.
Select the loudest preset/settings you intend to use. •
Play your instrument and turn Master Volume as high as you can without clipping the amp/speakers •
you’re feeding.
Electric Guitar to On-Stage Amp and Direct Out + Vocals/
Acoustic/etc. to Direct Out Only
1. Connect your electric guitar to Guitar In.
2. Connect your microphone to the Mic In, or your acoustic, etc. to the Aux or Line In.
3. On the INPUTS page:
Tone 1: Guitar •
Tone 2: select the (inputs) you’re using for your Mic, acoustic, etc. •
4. Connect 1/4-inch output(s) to your amp or speaker system.
5. Connect XLR output(s) to your recorder, mixer or PA.
6. On first OUTPUTS page (1/4-inch outputs):
Mode: Combo Front, Combo Pwramp, Stack Front, or Stck PwrAmp. •
Lows, Focus, Highs: as desired •
Tone 1: On •
Tone 1 Pan: center •
Tone 2: Mute (so your vocal/acoustic/etc. doesn’t go to your on-stage amp) •
7. On second OUTPUTS page (Studio/Direct Mix):
Mode: Studio/Direct •
Tone 1: On •
Tone 1 Pan: Left •
Tone 2: On •
Tone 2 Pan: Right •
8. Check your Master Volume.
Select the loudest preset/settings you intend to use. •
Play your instrument and turn Master Volume as high as you can without clipping the amp/speakers •
you’re feeding.