LSI 20160 - Manual (Page 21)

Detailed Installation Procedure 2-3
Copyright © 2001 by LSI Logic Corporation. All rights reserved.
2.2.2 Selecting a PCI Slot
For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before removing the host adapter board from
its package.
Step 2. Remove the LSI20160 from its packing and verify it is not
damaged.
Figure 2.1 shows an example of this host adapter board.
Step 3. Switch off and unplug the system.
Step 4. Remove the cabinet cover on your computer to access the PCI
slots.
Caution: Ground yourself by touching a metal surface before
handling boards. Static charges on your body can damage
electronic components. Handle plug-in boards by the edge;
do not touch board components or gold connector contacts.
The use of a static ground strap is recommended.
Step 5. Locate the PCI slots on your computer.
Refer to the user’s manual supplied with your computer to
confirm the location of the PCI slots. Also, the LSI20160
requires a PCI slot that allows bus master operation and
provides 3.3 Volts.
Figure 2.2 is a representative drawing of a
computer mainboard.