LSI 20160 User Manual
Page 26
Advertising
2-8
Installing the LSI20160
Copyright © 2001 by LSI Logic Corporation. All rights reserved.
Step 2.
Plug the 68-pin connector on the other end of the internal SCSI
ribbon cable into the SCSI connector on the internal SCSI
device.
Pin 1 must match on all connections. The lead in the cable
adjacent to pin 1 is colored.
illustrates a connection
to an internal SCSI device.
Figure 2.5
Internal SCSI Ribbon Cable to Internal SCSI Device
Connection
If you have more than one internal SCSI device, you must have
a cable with at least as many connectors as devices.
Advertising