LSI 20160 - Manual (Page 30)

2-12 Installing the LSI20160
Copyright © 2001 by LSI Logic Corporation. All rights reserved.
2.2.4.3 Making External SCSI Bus Connections
This section provides step-by-step instructions for making external SCSI
bus connections.
Step 1. Plug the 68-pin VHDCI connector on one end of a shielded
external high density cable (see
Figure 2.3 ) into the host
adapter connector J2.
This connector is exposed on the back panel of your computer.
Figure 2.9 illustrates where this connection is made.
Figure 2.9 External Cable to Host Adapter