LSI 20160 - Manual (Page 24)

2-6 Installing the LSI20160
Copyright © 2001 by LSI Logic Corporation. All rights reserved.
2.2.4 Connecting SCSI Peripherals
All internal SCSI bus connections to the LSI20160 can be made with an
unshielded, 68-conductor ribbon cable (see
Figure 2.3 ). One side of this
cable is marked with a color to indicate the pin-1 side. The connectors
on this cable are keyed to ensure proper pin-1 connection. Some internal
cables come with an LVD/SE terminator on one end. This end should be
furthest from the host adapter.
All external SCSI bus connections to the LSI20160 are made with
shielded, 68-conductor cables (see
Figure 2.3 ). The connectors on this
cable are always keyed to ensure proper pin-1 connection.
Figure 2.3 SCSI Cables
SCSI Cable for Internal Connections
68-pin
SCSI Cable for External Connections
68-pin
High Density
VHDCI