Polycom TransTalk 9000-Series - Manual (Page 199)

Conference Drop (F06)
5-89
Conference Drop (F06)
Description
This feature drops the last outside party added to a conference call, without
disconnecting the other parties.
Related Features
■
For instructions on setting up conference calls, see Conference Calls.
■ You can use Outside Conference Denial (#109) to disallow conference
calls with multiple outside parties.
■
This feature cannot be used with Call Screening (F25).
Considerations
You can program a Conference Drop button on a system phone to use the feature
with one touch.
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a Conference Drop button:
1. Press f 0 0 s s c at extension
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press f 0 6 .
5. Program another button for this extension or exit programming mode.
Using
System Phone
Press the programmed button or press f 0 6 .
The last-added outside party is dropped from the conference.
Standard Phone
Press the switchhook down once rapidly.
The last-added party (inside or outside) is dropped from the conference.