Programming – Polycom TransTalk 9000-Series User Manual
Page 213
Advertising
Direct Extension Dial Delay (#112)—Release 2.0 or
Later
5-103
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s
and
e
on system phones.)
To change the number of times an incoming call rings at extension 10 before the
system answers it:
1. Press
f 0 0 s s # 1 1 2
.
2. To change the number of rings, press
D
until the appropriate value
displays.
3. Select another procedure or exit programming mode.
Advertising