Polycom TransTalk 9000-Series - Manual (Page 369)

System Date (#101)
5-259
System Date (#101)
Description
This System Programming procedure sets the month, day, and year. The system
displays only the month and day on display phones when the phone is idle; the
month, day, and year print on SMDR call reports.
Related Features
■
The System Date is used to date-stamp the backup files when you use
Backup Programming—Automatic (#123) and Backup Programming—
Manual (#124).
■ Backup Programming—Automatic (#123) uses the System Date to
schedule the automatic backups.
■
Backup Programming—Automatic (#123) and Backup Programming—
Manual (#124) do not backup the System Date.
■
Restore Programming (#125) does not restore the System Date.
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the System Date:
1. Press f 0 0 s s # 1 0 1 at extension
10 or 11.
2. Enter today’s date in the form mmddyy (month, day, and year), including
leading zeros for single-digit months or days. For example, to enter April
26, 1997, press
0 4 2 6 9 7 . A display similar to the following
appears:
System Date
Data 042697
3. Select another procedure or exit programming mode.