Polycom TransTalk 9000-Series - Manual (Page 66)

Programming
2-34
To program at the extension, use the following procedure:
1. To start programming, dial f 0 0 .
The green lights next to buttons on which lines or pools are assigned for
the extension show the current Line Ringing settings. Remaining buttons
can be programmed with telephone numbers, extension numbers, or
system features.
2. To assign a name to the extension, press left i , then enter the
character codes. See ‘‘Extension Name Display’’ for the codes.
3. Program Personal Speed Dial Numbers, Auto Dial numbers, or system
features as described in Chapter 5.
To erase the current programming from a button, press the button, then
press
! .
4. To exit programming mode, you can press f 0 0 , or lift the handset
off-hook, then place it back in the cradle.