Panasonic DP-C263 EN - Manual (Page 34)

34
Chapter 1 Basic Menu Features
Storing a Job in Memory
A copy job can be registered as a preset job. It is useful to register the frequently used settings as
Preset jobs.
z Refer to the Recalling a Preset Job Stored in Memory (see page 35).
z Once registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
z A proof copy job cannot be registered in the job memory.
z “M1”/”M2” cannot be registered when Manual Skyshot Mode is selected. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
1
Place original(s).
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select the copy features (see pages 8
to 33, and 40 to 89).
4
Enter the desired number of copies.
5
Select “Preset Jobs”.
6
Select “Save”, and then select a job
button that does not have a job
registered.
z The job button, in which a job has been
registered, will have a job name.
7
Input a job name, and then select
“OK”.
z Up to 20 characters can be entered.
z For instructions on how to enter characters,
refer to Using the Keyboard in the
Operating Instructions (For Function
Parameters) on the provided CD-ROM.
z After completing the editing of the job name,
press the Reset key to return to the initial
screen of the current active mode.