Panasonic DP-C263 EN - Manual (Page 40)

40
Chapter 2 More Menus F
eatures
Chapter 2
More Menus Features 2-Sided Copy Mode
z For information on “1 -> 2”, “2 -> 2”, “Book -> 2”, and “N in 1”, please refer to the Operating Instructions (For
Basic Operations) on the provided booklet.
z The standard setting of the 2-Sided / Original->Copy can be changed. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
z Special paper such as cardboard cannot be used for 2-Sided copy.
Basic Operation for the 2-Sided Copy Mode
1
Place original(s).
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
z 2 -> 1, Multi-Size Feed, Job Build and
SADF: From ADF only.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “More Menus”.
4
Select the desired 2-Sided mode.
1 -> 1 : To clear the 2-Sided Copy Mode
2 -> 1 (see page 41)
2 Page (see page 42)
Booklet (see page 43)
Multi-Size Feed (see page 45)
z When “Multi-Size Feed” is selected, “1 -> 2”
or “2 -> 2” cannot be selected.
Job Build and SADF (see page 47)
For N in 1, 1 -> 2, 2 -> 2, and Book -> 2 Modes
z Refer to the Operating Instructions (For
Basic Operation) on the provided booklet.
5
Enter the desired number of copies.
6
Press the Start key.
z When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
z After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.