Panasonic DP-C263 EN - Manual (Page 62)

62
Chapter 2 More Menus F
eatures
„ Page Number
The original can be copied with page numbers printed.
z The default is -n- (number) format. To change to n/m (number/maximum) format, refer to Copier Settings in
the Operating Instructions (For Function Parameters) on the provided CD-ROM.
z Make sure to select “Sort”.
1
Select “Page Number”.
z To display this screen, refer to steps 1 to 4 of
Basic Operation for Stamping (see page
61).
2
Select the orientation of the original.
3
Select the stamping position.
4
To change the start page, or start
position, select “Change”.
Select the orientation of the
original according to the
orientation of its characters
(vertical direction).
Select the orientation of the
original according to the
orientation of its characters
(horizontal direction).
The page number is printed on the
bottom at the center.
The page number is printed on the
bottom right side.
The page number is printed on the
opposite side.