Panasonic DP-C263 EN - Manual (Page 54)

54
Chapter 2 More Menus F
eatures
Auto Zoom
By setting Auto Zoom, originals can be automatically Enlarged/Reduced to fit the size of the loaded
paper.
z This function can be selected when the original is placed on the platen.
z As the original is placed on the platen, the position of the original may be erroneously detected if influenced by
ambient light.
z If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
1
Open the ADF more than 45 degrees,
and then place the original on the
platen, leaving it open.
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “More Menus”.
4
Select “Zoom / Effects”, and then
select “Auto Zoom”.
Face Down. Align with top left
corner.