Panasonic DP-C263 EN - Manual (Page 48)

48
Chapter 2 More Menus F
eatures
„ Job Build
This is useful, when copying multiple sets of originals that exceed the maximum capacity of the ADF of
85 sheets (20 lb). (See the Example below)
Ex: To make 5 sets of sorted copies of 100-sheet of originals.
(a) Place the first 85 sheets of originals on the ADF.
(b) Select “2-Sided / Original->Copy” Copy menu, and select Job “Job Build and SADF”.
(c) Select “Sort / Finish” menu, and select the desired Sorting/Finishing end result.
(d) Press the Start key.
(e) After scanning the first 85 sheets, you can place the remaining 15 sheets of originals on the ADF
within 5 second to continue copying without interrupting the cycle.
Or if you do nothing, the machine will display “Another original? / Yes or No”.
(f) Place the remaining 15 sheets of originals on the ADF tray, and select “Yes”.
(g) After scanning the remaining 15 sheets, “Another original? / Yes or No” will display, select “No”
to start the printing process.
z Original should be placed on the ADF.
z Up to 999 sheets of the originals can be scanned in one job.
The maximum capacity of the scanned data can be reached less than 999 sheets of the originals depending on
the type of sheets being scanned.
If the memory becomes full during scanning, follow the instructions on the Display.
85
1
100
1
100
86
Originals:85 sheets <1st scan>
Originals: Remaining 15 sheets <2nd scan>
1st and 2nd Scanning Data are
combined into one job.
5 sets of 100-sheet sorted
copies are printed