Panasonic DP-C263 EN - Manual (Page 57)

57
Chapter 2 More Menus F
eatures
5
Select “XY” to set the same value for X
and Y, or “X”, “Y” to set a different
value for X and Y.
6
Input the erasing width with “S” and
“T”, or the keypad, and then select
“OK”.
z The erasing width can be set in 1 mm
increments from 5 mm to 99 mm.
7
Enter the desired number of copies.
8
Press the Start key.
z When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
(Only Sort setting)
z After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
XY Select to set the same erasing width
for all sides.
X Select to set the erasing width for the
right, and left sides.
Y Select to set the erasing width for the
top, and bottom sides.