Printek 4000se User Manual
Page 22
Advertising
G E T T I N G S T A R T E D
14
Loading Paper
Please refer to the appropriate section below for loading paper in the
FormsPro 4300se, 4500se, or 4503se.
FormsPro 4300se & 4500se Single Tractor Model
If the printer is not currently turned on, push the ON-1 side of the power
switch on the right side of the printer. After you turn on the printer, it
performs several self-tests.
Note: Paper is installed through the slot in the bottom of the
printer.
1. To open the unit so you can install paper, pull outward on the
bottom of the lower front panel of the printer as shown to release
the latch.
Opening Latch Panel
Advertising