Pioneer Super Tuner III D AVH-P6550DVD - Manual (Page 35)

Searching for a desired
scene, starting playback
from a specified time
You can use the search function to search for
a desired scene by specifying a track, and the
time search function to specify the time on a
disc at which play starts.
! During PBC playback of Video CDs, this
function cannot be operated.
! Time search is not possible when disc play-
back has been stopped.
1 Touch SEARCH and then touch TRACK
(track) or TIME (time).
2 Touch 09 to input the desired num-
ber.
For tracks
! To select 3, touch 3.
! To select 10, touch 1 and 0 in order.
! To select 23, touch 2 and 3 in order.
For time (time search)
! To select 21 minutes 43 seconds, touch 2,
1, 4 and 3 in order.
! To select 1 hour 11 minutes, convert the
time into 71 minutes 00 seconds and touch
7, 1, 0 and 0 in order.
# To cancel the input numbers, touch C.
# You can also input the desired number by
using the joystick and 0-9.
3 While the input number is displayed,
touch ENTER.
This starts playback from the selected scene.
Note
You can also perform the same operations using
SEARCH. To display SEARCH, touch A.MENU
and then touch FUNCTION.
Specifying track
You can use the direct search function to
search for a desired scene by specifying a
track.
! Only the remote control can operate this
function. To perform this function, switch
the remote control operation mode to DVD.
(Refer to page 14.)
! During PBC playback of Video CDs, this
function cannot be operated.
% Press 010 corresponding to a desired
track number when the disc is stopped.
Track number is displayed for eight seconds
and playback starts from the selected track.
! To select 3, press 3.
! To select 10, press 10 and 0 in order.
! To select 23, press 10, 10 and 3 in order.
Note
With some discs, the icon may be displayed
and operation may not be possible.
Selecting audio output
You can switch between stereo and monaural
audio output.
% Press AUDIO during playback.
Press AUDIO repeatedly to switch between
the following outputs:
L+R (left and right channels)L (left channel)
R (right channel)
Note
You can also perform the same operations using
L/R SELECT. To display L/R SELECT, touch
A.MENU and FUNCTION and then touch
NEXT.
Playing Video CDs
En
35
Section
07
Playing
Video
CDs