Digitalsignalprocessor – Pioneer Super Tuner III D AVH-P6550DVD User Manual

Page 69

Advertising
background image

center frequency, an equalizer level and a Q

factor for each band.

! A separate CUSTOM1 curve can be cre-

ated for each source.

! A CUSTOM2 curve can be created com-

mon to all sources.

! The center speaker largely determines the

sound image and getting the balance right

isnt easy. We recommend reproducing a 2-

ch. audio (a CD for example) and getting

the balance right among the speakers ex-

cept for the center, and then reproducing a

5.1-ch. audio (Dolby Digital or DTS) and ad-

justing the center speaker output to the

balance you have already got among the

other speakers.

1 Touch A.MENU and AUDIO and then

touch NEXT twice.

2 Touch PEQ.

# You cannot select PEQ when neither
CUSTOM1 nor CUSTOM2 equalizer curve is se-
lected.

3 Touch a or b to select the desired item.

Each time you touch a or b selects the item

in the following order:

SP-SEL (speakers)BAND (bands)

FREQUENCY (center frequency)LEVEL

(equalizer level)Q. FACTOR (Q factor)

4 Touch c or d to select the speaker to

be adjusted.

Touch c or d until the desired speaker ap-

pears in the display.

REAR (rear speakers)CENTER (center speak-

er)FRONT (front speakers)

# You cannot select speakers whose size is set
OFF.

5 Touch b and then touch c or d to se-

lect the equalizer band to be adjusted.

Each time you touch c or d selects equalizer

bands in the following order:

LOW (low)MID (mid)HIGH (high)

6 Touch b and then touch c or d to se-

lect the center frequency of selected band.

Touch c or d until the desired frequency ap-

pears in the display.

100125160200250315400

5006308001k1.25k1.6k2k

2.5k3.15k4k5k6.3k8k (Hz)

7 Touch b and then touch c or d to ad-

just the equalizer level.

Each time you touch c or d increases or de-

creases the equalizer level. +06  06 is dis-

played as the level is increased or decreased.

8 Touch b and then touch c or d to se-

lect the desired Q factor.

Each time you touch c or d switches between

the following Q factor:

WIDE (wide)NARROW (narrow)

# You can adjust parameters for each band of
the other speakers in the same way.

Note

You can select a center frequency from among 20
frequencies for each band. You can change the
center frequency in 1/3-octave steps, but you can-
not select frequencies that have intervals shorter
than 1 octave among the center frequencies of
the three bands.

DigitalSignalProcessor

En

69

Section

14

DigitalSignalProces

sor

Advertising