Adjusting the time alignment, Adjusting 3-band parametric equalizer, Using the equalizer – Pioneer Super Tuner III D AVH-P6550DVD User Manual

Page 68: Digitalsignalprocessor, Recalling equalizer curves

Advertising
background image

Adjusting the time alignment

By adjusting the distance between each

speaker and a selected listening position, you

can insert delay times into the speaker output

to obtain a correct sound image and overall

level balance. Although this is automatically

achieved when you set the listening position,

the time alignment feature provides a fine ad-

justment.

1 Touch A.MENU and AUDIO and then

touch NEXT.

2 Touch TIME ALIGN.

# You cannot select TIME ALIGN when neither
FRONT-L nor FRONT-R is selected in POSITION.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT L (front speaker left)CENTER (center

speaker)FRONT R (front speaker right)

REAR R (rear speaker right)REAR L (rear

speaker left)SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set
OFF.

4 Touch c or d to adjust the distance be-

tween the selected speaker and the listen-

ing position.

Each time you touch c or d increases or de-

creases the distance. 0.0  500.0 [cm] is dis-

played as the distance is increased or

decreased.

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display

Equalizer curve

SUPER BASS

Super bass

POWERFUL

Powerful

NATURAL

Natural

VOCAL

Vocal

FLAT

Flat

CUSTOM1

Custom 1

CUSTOM2

Custom 2

! CUSTOM1 and CUSTOM2 are adjusted

equalizer curves.

! When FLAT is selected no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

FLAT and a set equalizer curve.

1 Press EQ and hold to switch to equali-

zer function.

Press EQ and hold until an equalizer curve

name appears in the display.

# To switch to SFC function, press EQ and hold
again.

2 Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

SUPER BASSPOWERFULNATURAL

VOCALFLATCUSTOM1CUSTOM2

Adjusting 3-band parametric

equalizer

For CUSTOM1 and CUSTOM2 equalizer

curves, you can adjust the front, rear and cen-

ter equalizer curves separately by selecting a

DigitalSignalProcessor

En

68

Section

14

Advertising