Setting the speaker setting, Using the direct control, Using the dolby pro logic – Pioneer Super Tuner III D AVH-P6550DVD User Manual

Page 65: Digitalsignalprocessor

Advertising
background image

Using the direct control

You can override audio settings to check for ef-

fectiveness of your audio settings.

! All audio functions are locked out during

the direct control is on except VOLUME.

1 Touch A.MENU and AUDIO and then

touch DIRECT.

2 Touch a to turn the direct control on.

# To turn direct control off, touch b.

Using the Dolby Pro Logic

Dolby Pro Logic gives enhanced spatial and di-

rectional effects, creating theater-like sense of

presence and ambience.

! If the source is a 2-channel LPCM audio or

a 2-channel Dolby Digital audio and you se-

lect SFC effects that are most applicable

for 5.1-channel audio (i.e., MUSICAL,

DRAMA or ACTION), we recommend turn-

ing Dolby Pro Logic on. On the other hand,

when selecting SFC effects that are in-

tended for use with 2-channel audio (i.e.,

JAZZ, HALL or CLUB), we recommend turn-

ing Dolby Pro Logic off.

1 Touch A.MENU and AUDIO and then

touch NEXT.

2 Touch DOLBY PL.

3 Touch a to turn the Dolby Pro Logic on.

# To turn Dolby Pro Logic off, touch b.

Note

When playing a 2-channel mono source with Pro
Logic turned on, there may be occasions when
the following will occur:

! No audio is output if the center speaker set-

ting is SMALL or LARGE and no center speak-
er is installed.

! Audio is heard only over the center speaker if

installed and the center speaker setting is
SMALL or LARGE.

Setting the speaker setting

You need to make with/without (or yes/no) and

size (bass reproducing capacity) selection/ad-

justments depending on the installed speak-

ers. The size needs to be set to LARGE (large)

if the speaker is capable of reproducing

sounds of about 100 Hz or below. Otherwise

select SMALL (small).

! Low frequency range is not output if the

subwoofer is set to OFF and the front and

rear speakers set to SMALL or OFF.

! It is imperative that non-installed speakers

be set to OFF.

! Set the front or rear speaker to LARGE if

the speaker is capable of reproducing bass

content, or if no subwoofer is installed.

1 Touch A.MENU and AUDIO and then

touch NEXT.

2 Touch SP SET.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT (front speakers)CENTER (center

speaker)REAR (rear speakers)

SUB WOOFER (subwoofer)PHASE (sub-

woofer setting)

# You can switch to PHASE only when the sub-
woofer has been set to ON.

DigitalSignalProcessor

En

65

Section

14

DigitalSignalProces

sor

Advertising