Pioneer Super Tuner III D AVH-P6550DVD - Manual (Page 83)

Symptom Cause Action (See)
Rear display picture disappears. The source disc being listened to
with the head unit has been ejected.
Before ejecting the disc, switch the source.
This problem may occur when certain con-
nection methods are used.
When the ignition switch is
turned ON (or turned to ACC),
the motor sounds.
This unit confirms whether a disc is
loaded or not.
This is a normal operation.
Nothing is displayed.
The touch panel keys cannot
use.
The back-up camera is not con-
nected.
B-CAMERA is incorrect setting.
Connect a back-up camera.
Press MENU on the head unit to return to the
source display and then select the correct set-
ting for B-CAMERA. (Page 78)
Problems during DVD playback
Symptom Cause Action (See)
Playback is not possible. The loaded disc has a different re-
gion number from this unit.
Replace the disc with one featuring the same
region number as this unit. (Page 6, Page 91)
A parental lock message is dis-
played and playback is not pos-
sible.
Parental lock is on. Turn parental lock off or change the level.
(Page 72)
Parental lock cannot be can-
celed.
The code number is incorrect. Input the correct code number. (Page 72)
You have forgotten your code num-
ber.
Press CLEAR 10 times to cancel the code
number. (Page 73)
Dialog language (and subtitle
language) cannot be switched.
The DVD playing does not feature
multiple language recordings.
You cannot switch among multiple languages
if they arent recorded on the disc.
You can only switch between items
indicated in the disc menu.
Switch using the disc menu.
No subtitles are displayed. The DVD playing does not feature
subtitles.
Subtitles are not displayed if they are not re-
corded on the disc.
You can only switch between items
indicated in the disc menu.
Switch using the disc menu.
Playback is not with the audio
language and subtitle language
settings selected in DVD SETUP.
The DVD playing does not feature
dialog or subtitles in the language
selected in DVD SETUP.
Switching to a selected language is not possi-
ble if the language selected in DVD SETUP is
not recorded on the disc.
Switching the viewing angle is
not possible.
The DVD playing does not feature
scenes shot from multiple angles.
You cannot switch between multiple angles if
the DVD does not feature scenes recorded
from multiple angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
Switch between multiple angles when watch-
ing scenes recorded from multiple angles.
The picture is extremely unclear/
distorted and dark during play-
back.
The disc features a signal to prohibit
copying. (Some discs may have
this.)
Since this unit is compatible with the copy
guard analog copy protect system, when play-
ing a disc that has a signal prohibiting copy-
ing, the picture may suffer from horizontal
stripes or other imperfections when viewed
on some displays. This does not mean this
unit is malfunctioning.
AdditionalInformation
En
83
Appendix
AdditionalInformation