Planet Technology Network Device MAP-2105 - Manual (Page 23)

Enter the username which is pre-defined in VPN server of MESH Gateway.
Password
Enter the password which is pre-defined in VPN server of MESH Gateway.
Enable server-side authentication
Enable or disable server-side authentication.
Servers Username
Enter the server username for server to authenticate.
Servers Password
Enter the server password for server to authenticate.
“Save Config” button
Press this button to save new settings.
Back
Link to previous page.
3.3.3 NTP
NTP-Client contains the following parameters:
Enable NTP-Client
Enable or disable the NTP client.
Server 1
Enter IP address or hostname for the NTP server.
18