Planet Technology Network Device MAP-2105 - Manual (Page 47)

the Output File Name text box in the Settings column and press the Set button. Besides, choose
Settings > Output Filename from the menu bar would open a window to prompt the user for the
new log file name.
To disable the log feature, uncheck the Write to File check box in the Settings column and hit the
Set button, or uncheck the Settings > Write to File menu item from the menu bar. Under this
circumstance, the alarms deleted from the Trap Viewer will be gone forever.
The remaining two setting option in the Settings column is the Port and Community. The Port
defines the port number of the system to listen to the alarms, while the Community defines the
password to match the community of incoming traps. Similarly, user can fill in the value in the
space provided and hit the Set button or select from the menu bar.
4.2.3 MLRD Manager
The MLRD Manager is the configuration pages of a MAP-2105. User may open the MLRD
Manager to update or edit the settings of the node. In order to start up the MLRD Manager,
choose the MLRD Manager from the drop-down list at the left bottom corner of AP-Finder, as
shown:
This action will open window to prompt the user for the SNMP Passwords. The configurations can
only be done with the correct password or community. Note that the MLRD Manager is supporting
SNMP Version 1, 2c and 3. Thus for SNMP Version 1 or 2c, only the Community field is
compulsory, whereas for SNMP Version 3, the Username, Password and Pass Phrase fields is
required to be filled.
42