Planet Technology Network Device MAP-2105 - Manual (Page 53)

4.3.5 Config > Network > WAN
This panel consists of two parts: the upper part allow user to select the WAN Interface type to use
and the lower part is used to configure the network settings. In order to select a WAN Interface,
select on the desired type and type the Configure Details button.
Note: the MAP-2105 does not support PPPoE connection type.
The network setting portion enables the configurations on the DNS (Domain Name Service). This
feature translates the domain name into IP Address form, which recognized by the Internet. This
translation is done through its own server. If the primary server failed to perform the translation,
the secondary server will take over the process.
The parameters of the Network panel:
Gateway
Specify the gateway for the static IP Address
48