Planet Technology Network Device MAP-2105 - Manual (Page 62)

Server 1, Server 2, Server 3
The network will connect to the NTP server 1, while Server 2 and 3 are used as back up
servers.
Time Zone
Choose the desired time zone from the list available
4.3.11 Config > Services > Mobile IP
This section describes the parameters of the MLRD. The parameters at this panel:
Enable Mobile Location Register Service
Check the checkbox to enable the mobile location register (MLR) service
Mobile IP Community Name
Specify a common name, which is compulsory for all the participating mobile IP nodes
Enable Backup Mobile Location Register
Check the checkbox to enable the information backup to another server
MLR Type
57