Planet Technology Network Device MAP-2105 - Manual (Page 61)

4.3.9 Config > Management > Remote Syslog
This submenu is used to set the remote syslog server IP Address, who is receiving the syslog
message from the MAP-2105.
Remote Server
Specifies the IP Address of the syslog server at the column provided. In order to disable
this feature, please leave the column empty and click the OK button
4.3.10 Config > Services > NTP-Client
The NTP is a protocol that used to synchronize the clocks of computers to some time reference.
In this case it is used to synchronize the time of different nodes
Parameters at this page:
Enable NTP-Client
Enable of disable the NTP-client feature
56