Planet Technology Network Device MAP-2105 - Manual (Page 33)

Press this button to save new settings.
“Use Default” button
Press this button to restore the factory default configuration for this page.
3.6 Reboot
Reboot contains the following parameters:
Please enter the time to reboot (seconds)
Enter a delay value so that the device will only reboot after the requested delay of time.
“Reboot” button
Press this button to reboot the device. If a delay is specified, it will wait for that amount of
time before rebooting the device.
3.7 Reset
Reset contains only one “Reset to Factory Default” button. Press this button to restore the
configuration for the device back to factory default.
3.8 Status
28