Receiver connections – Pico Macom SIRD-FTA User Manual
Page 10
3.1 Connecting to Antenna and Dish
This Receiver works only with a satellite dish that can access free-to-air pro-
gramming. The diagram below shows the basic connections required for the
satellite LNB, TV and other possible connections on the rear panel. (Consult
the following pages for additional connections.) lf you need assistance to iden-
tify your specific equipment configuration, contact your authorized dealer.
Instructions:
1. Connect satellite input cable to Receiver “IF In.”
2. Connect cable from Receiver’s “Out to TV” to TV’s “In from Antenna.”
3. Connect outdoor antenna cable to Receiver’s “Antenna In.”
For safety reasons, keep equipment unplugged from power sources until all
cables are properly connected.
10
3.1 Connecting to Antenna and Dish
RECEIVER CONNECTIONS