Pico Macom SIRD-FTA - Manual (Page 23)

4.2 Setting Radio Channels
Select <Radio channel> by using CH+/– in <Main Menu>. The result will be
the sub-menu as shown in the following figure.
The operation for radio channels is the same as TV channels. To switch
between TV and radio modes, press TV/RADIO on the remote control.
Increase or decrease the volume by using VOL+/– either on the remote control
or on the Receiver’s front panel when watching TV or listening to the radio.
When watching a channel, the video from the current channel is frozen as
soon as PAUSE is pressed. Press PAUSE again to continue watching.
MAIN MENU
4.2 Setting Radio Channels
23