Pico Macom SIRD-FTA - Manual (Page 24)

4.3 Installation Settings
Select <Installation> in <Main Menu> by using CH+/–, press OK, you will see
the sub-menu as shown in the following figure. It has four items: Satellite
Search, Transponder Search, Satellite Setting and Transponder Setting.
Satellite Search
Select <Satellite Search> by using CH+/–. Press OK to view the sub-menu as
shown in the following figure.
A. Sat name
Select <Sat name>, then press VOL+. Select satellite by using CH+/– or
PGUP/PGDW.
Press OK to confirm it.
B. Transponder
Select a valid transponder in the satellite to check the signal. Select
<Transponder>, then press VOL+. Select transponder by using CH+/– or
PGUP/PGDW
. Press OK to confirm it.
C. LNB frequency
You can select the predefined LNB frequency by using VOL+/– . Manually
enter a specific frequency in MHz unit by pressing numeric keys.
24
4.3 Installation Settings
MAIN MENU