Pico Macom SIRD-FTA - Manual (Page 13)

3.4 Connecting to TV and VCR using RF Support and RCA
Instructions:
1. Connect satellite input cable to Receiver’s “IF In.”
2. Connect cable from Receiver’s “Output to TV” to TV’s “RF In.”
3. Connect external TV antenna input cable into VCR’s “In From Antenna.”
4. Connect cable from VCR’s “Out to Antenna” to Receiver’s “Antenna In.”
For safety reasons, keep equipment unplugged from power sources until all
cables are properly connected.
3.4 Connecting to TV and VCR using RF Support and RCA
13
RECEIVER CONNECTIONS