Pico Macom SIRD-FTA - Manual (Page 18)

Edit Channels
Scroll CH+/– until you select <Edit Channels>, then press OK. While you are
watching TV, you can view the Channel List (shown in the figure below). You
can also identify the satellite and transponder of the selected TV channel.
A. Lock
The Lock command lets you block a channel so it cannot be viewed. Select
the Lock command by using VOL+/–. Once the channel is locked, you will be
asked to enter a PIN code before you can view the program.
a. Select the “Lock channel” icon by using VOL+/–.
b. Select a channel you want to lock by using CH+/–, then press OK. You will
be asked to input your password. The default factory password is “0000.”
Input the password, and the channel will be marked with , as shown in
the figure below.
c. To cancel, press OK and input password again.
d. Press EXIT to return to the previous menu.
B. Delete
The Delete command allows you to remove a channel from the channel list by
using CH+/–.
a. Select “Delete channel” icon by using VOL+/–.
b. Select a channel you want to delete by using CH+/–, and press OK. The
channel will be marked with . To cancel, press OK again.
c. The channel will be automatically deleted when you exit the menu.
18
MAIN MENU
4.1 Setting TV Channels
X