Panasonic WV-NP244 - Manual (Page 21)

21
[About SD memory card]
Select "Use" or "Not use" to determine whether or not to
use the SD memory card.
Important:
• Before removing the SD memory card from the cam-
era, it is necessary to select "Not use" first.
• After inserting the SD memory card, it is necessary
to select "Use" to use the SD memory card.
[Information about SD memory card]
Available size and the total size of the SD memory card
will be displayed.
Depending on the state of the SD memory card, the size
indications will differ as follows.
Indication Description
--------KB/--------KB No SD memory card is inserted.
Failed to obtain available size
due to error, etc.
********KB/********KB The SD card memory is unfor-
matted, or locked, etc.
Note:
When the available size reached "0 KB", images will
not be saved on the SD memory card. It is recom-
mended to check the available size of the SD card
memory periodically.
[Format]
To format the SD memory card, click the [Execute] but-
ton.
Important:
• Before formatting the SD memory card, it is neces-
sary to select "Use" for "About SD memory card" on
the [SD memory card] tab of the "Basic setup" page
and "OFF" for "FTP periodic transmission" on the
[FTP] tab of the "Network setup" page.
• Format the SD memory card only by clicking the
[Execute] button on the setup menu. Otherwise, the
following functions using the SD memory card may
not work properly with this camera.
• Save/obtain images when failed to transmit to
the FTP server using the FTP periodic transmis-
sion function
• Save/obtain the system logs
• It is recommended to use Panasonic’s SD memory
card. Otherwise, the camera may not work properly
or performance deterioration may be caused.
• It is impossible to access the SD memory card in the
process of formatting.
• All data saved on the SD memory card will be delet-
ed when the SD memory card is formatted.
• Do not turn the power of the camera off in the
process of formatting.
• After formatting the SD memory card, available size
may be smaller than the total size since the default
directory is automatically created in the SD memory
card.
Configure the settings relating to SD memory card [SD memory card]
Click the [SD memory card] tab on the "Basic setup" page. (
☞ page 16)
The settings relating to the SD memory card can be configured on this page.