Panasonic WV-NP244 - Manual (Page 25)

25
Configure the camera settings such as image quality and brightness, etc. [Camera]
Click the [Camera] tab on the "Camera setup" page. (
☞ page 16)
The following are descriptions of how to configure the settings relating to images such as brightness, etc.
[Brightness]
17 steps (–8 - 8) are available for brightness. "–8" is the
darkest and "8" is the brightest.
Default: 0
[White balance]
Select the white balance adjustment method from the
following.
AUTO: Adjusts the white balance automatically.
HOLD: Fixes to the white balance applied when the
[SET] button is clicked.
Default: AUTO
[Aperture level]
9 steps (–4 - 4) are available for aperture level (sharp-
ness). "–4" is the softest and "4" is the sharpest.
Default: 0
[Flicker-less mode]
Select "ON" or "OFF" to determine whether or not to use
the flicker-less mode. Normally, select "OFF". When
using the camera under fluorescent lamps and flickers
appear, select "ON".
Default: OFF
[Sensitivity up]
Select the sensitivity from the following.
OFF: Does not use the sensitivity adjustment.
[x2]: Adjusts the sensitivity up to x2 automatically.
[x4]: Adjusts the sensitivity up to x4 automatically.
[x8]: Adjusts the sensitivity up to x8 automatically.
[x16]: Adjusts the sensitivity up to x16 automatically.
Default: OFF
Important:
When the sensitivity is incremented, the refresh
interval may be longer.
[Backlight compensation (BLC)]
Select "ON" or "OFF" to determine whether or not to
compensate backlight.
ON: Compensates backlight. (Suitable when the subject
has backlight.)
OFF: Does not compensate backlight. (Suitable when
the subject has light in the front.)
Default: OFF
[Light control (ALC/ELC)]
Select "ALC" or "ELC" for light control according to the
lens in use.
ALC: Select this when an auto iris lens (DC) is in use.
ELC: Select this when a fixed iris lens is in use.
Default: ALC
Important:
• When "ELC" is selected, "ON" for "Flicker-less
mode" will be unavailable.
• DC/video servo type lenses are not supported.
• When "ON" is selected for "Flicker-less mode", sen-
sitivity may be decremented.