Panasonic WV-NP244 - Manual (Page 45)

45
Maintenance of the camera [Maintenance]
System log check, firmware upgrade, and initialization of the setup menu can be performed on this page.
The "Maintenance" page has 3 tabs of the [System log] tab, the [Upgrade] tab and the [Initialization] tab.
Check the system log [System log]
Click the [System log] tab of the "Maintenance" page. ( ☞ page 16)
Up to 4000 system logs can be saved on the SD memory card when the SD memory card is inserted after selecting
"Use" for "About the SD memory card" on the [SD memory card] tab (
☞ page 21)
When "Not use" is selected for "About the SD memory card", up to 100 system logs can be saved on the built-in
memory of the camera.
When the saved system logs reached the maximum number, the older system logs will be overwritten by the newer
logs. In this case, the oldest log is the first to be overwritten.
The system logs will be displayed in 100 logs each.
When using the SD memory card, the logs will be saved even when the power of the camera is turned off. When not
using the SD memory card, the logs will be deleted when the power of the camera is turned off.
[Time & date]
Time and date at the error occurrence will be displayed.
[Error message]
The descriptions about the error will be displayed.
Refer to page 48 for further information about the sys-
tem logs.