Panasonic WV-NP244 - Manual (Page 33)

33
Configure the settings relating to the mail notification [Notification]
Click the [Notification] tab on the "Alarm setup" page. (
☞ page 16)
The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it
is necessary to configure the settings of the mail server. (
☞ page 37)
[E-mail notification]
Select "ON" or "OFF" to determine whether or not to
notify of an alarm occurrence by e-mail at an alarm
occurrence.
Default: OFF
[Attach image]
Select "ON" or "OFF" to determine whether or not to
attach an image to the mail to be sent.
Default: OFF
Note:
The settings for "Image capture size" of "Alarm
image setup" on the [Alarm] tab (
☞ page 29) will be
applied to the size of the image to be attached.
[Address]
Enter the destination mail address. Up to 4 destination
addresses can be registered.
To notify by e-mail, check the "Notification setup" check-
box respective to the desired address. To delete the
registered address, click the [DEL] button respective to
the desired address.
Number of characters for the destination mail
address: 3 - 128 characters
[Mail subject]
Enter the mail subject.
Number of characters for the mail subject: 0 - 50
characters
[Mail body]
Enter the mail body.
Number of characters for the mail body: 0 - 200 char-
acters