Panasonic WV-NP244 - Manual (Page 27)

27
Configure the multi-screen settings [Multi-screen setup]
The cameras to be used for the multi-screen display can be registered on this page.
Refer to page 16 for descriptions of how to display "Multi-screen setup" page.
[IP address]
Enter the IP address or the host name of the camera to
be used for the multi-screen. 4 cameras can be regis-
tered as a group and up to 2 groups (8 cameras) can be
registered.
When the HTTP port number for the camera had
been changed, enter as follows:
"IP address of the camera:port number", for example
"192. 168. 0. 10:8080".
Number of characters for the IP address: 1 - 128
characters
Note:
When using the host name, it is necessary to con-
figure the DNS settings. (
☞ page 40)
[Camera title]
The entered camera title will be displayed on a multi-
screen.
Number of characters for the camera title: 0 - 20
characters