Panasonic AJ-SD965 - Manual (Page 41)

41
Setup menus
(continued)
The underlined items indicates the initial setting.
USER menu <BASIC>
No./Item Description
015
MONI
CONTROL
This sets whether the recorder is to be
forcibly set to the EE mode and the player’s
playback signals are to be output to the
monitor by pressing the recorder’s PLAYER
button when a monitor has been connected
only to the recorder during deck-to-deck
editing.
0000 MANU :
The recorder is not forcibly set to the EE
mode.
0001 AUTO :
The recorder is forcibly set to the EE mode,
and the player’s playback signals are output.
017
CHARA SIZE
This selects the size of the characters for the
superimposed display output from the VIDEO
OUT 3 or SDI OUT 3 connector.
0000 NORMAL : Standard size
0001
LARGE : 4 times larger than the standard
size
<Note>
When LARGE has been selected, only time data
is displayed, regardless of the setup menu
No.008 (DISPLAY SEL) setting.
010
CHARA V-POS
This sets the position of the characters on
the vertical plane for the time code and other
super displays output to the VIDEO OUT
3/SDI OUT 3 connector.
[625i system] [525i system]
0000 0 0000 0
: : : :
0023 23 0018 18
: : : :
0028 28 0022 22
<Note>
When the DISPLAY SEL setting causes
characters to extend beyond the edges of the
screen, the setting value is changed so that the
characters are automatically displayed in a
position on the screen.
011
CHARA TYPE
This selects the display type for the super
display output to the VIDEO OUT 3/SDI OUT 3
connector as well as for displays such as the
setting menu, etc.
0000 WHITE : White characters against a
black background.
0001 W/OUT : White characters with a black
border.
012
SYS FORMAT
This sets the VTR’s recording and playback
format.
0000 50M :
DVCPRO50 (50 Mbps) is selected.
0001 25M :
DVCPRO (25 Mbps) is selected.
<Note>
The format complies with the setting of this
menu item when the tape is ejected.
013
PB FORMAT
This sets the format in which the tape is to
be played back.
0000 MANUAL :
The format complies with the setting of setup
menu No. 012 (SYS FORMAT) when a
DVCPRO cassette is inserted.
The format complies to the format recorded on
the tape when a DV or DVCAM cassette is
inserted.
0001 AUTO :
The format complies with the format recorded
on the tape.
<Notes>
O When an editing mode has been selected, the
“MANUAL” setting is forcibly established for
internal operations.
O When AUTO has been selected, the picture
and sound may be disturbed until the format is
detected after a tape is loaded.
No./Item Description
009
CHARA H-POS
This sets the position of the characters on
the horizontal plane for the time code and
other super displays output to the VIDEO
OUT 3/SDI OUT 3 connector.
0000 0
: :
0004 4
: :
0016 16
070
TV SYSTEM
This selects the TV system.
0000 525 : The 525 interlace/59.94 Hz
system is selected.
0001 625 : The 625 interlace/50 Hz system
is selected.
<Note>
After this setting is changed, turn off and back
on the power again to take it effect.