Panasonic AJ-SD965 - Manual (Page 83)

83
[GENERAL]
indicates safety information.
Power supply: AC 100 – 240 V, 50/60 Hz
Power consumption: 115 W
130 W (with all options)
Operating ambient temperature:
5°C to 40°C
Operating ambient humidity:
10% to 80% (no condensation)
Weight:
38.5 lb (17.5 kg)
Dimensions (W a H a D):
16 3 / 4 inches a 6 15 / 16 inches a 16 7 / 16 inches
(424 mm a 175.2 mm a 417 mm)
(Not including the support legs, connectors, and JOG dial)
Recording format:
DVCPRO50/DVCPRO format selectable
Recording video signal:
525i/625i system selectable
Recording audio signal:
DVCPRO50:
48 kHz 16-bit 4 channels
DVCPRO:
48 kHz 16-bit 2 channels
Recording tracks:
Digital video audio:
helical track
The time code is recorded in the sub-code area.
Cue track:
1 track
Control track:
1 track
Tape speed:
[525i system]
67.640 mm/sec (DVCPRO50)
[625i system]
67.708 mm/sec (DVCPRO50)
Recording time:
50 Mbps:
126 minutes (using the AJ-5P126XG)
92 minutes (using the AJ-5P92LP)
33 minutes (using the AJ-P66MP)
25 Mbps:
252 minutes (using the AJ-5P126XG)
184 minutes (using the AJ-5P92LP)
66 minutes (using the AJ-P66MP)
Tape:
Metal tape
FF/REW time:
Less than 3 min (with AJ-5P126XG)
Less than 2 min (with AJ-P126LP)
Less than 1 min (with AJ-P66MP)
Digital slow:
–0.43 a to +0.43 a , +0.5 a , +0.75 a speed
(DVCPRO, DVCPRO50)
Editing accuracy:
±0 frames (using the time code)
Tape timer accuracy:
±1 frame (using the continuous CTL signal)
Servo lock time:
Less than 0.5 sec (color framing/standby ON)
Specifications
[VIDEO]
$ Digital video
Sampling frequencies:
Y: 13.5 MHz, P B /P R : 6.75 MHz
(DVCPRO50)
Quantizing:
8 bits
Video compression method:
DV-Based compression (SMPTE 314M)
Video compression rate:
DVCPRO50: 1/3.3,
DVCPRO: 1/5
Error correction:
Reed-Solomon product code
Bit rate:
DVCPRO50: 50 Mbps,
DVCPRO: 25 Mbps
$ Digital IN/Analog component OUT
Video bandwidth:
[525i system]
Y : 30 Hz to 5.75 MHz (±0.5 dB)
P B /P R : 30 Hz to 2.75 MHz (±0.5 dB)
[625i system]
Y : 25 Hz to 5.75 MHz (±1.0 dB)
P B /P R : 25 Hz to 2.75 MHz (±1.0 dB)
S/N ratio:
Better than 60 dB (Y)
K factor:
Less than 1% (Y 2T)
Y/P B , P R delay:
Less than 10 ns
$ Video input connector
Analog component input (option):
BNC a 3 (Y, P B , P R )
Y: 1.0 V [p-p], P B /P R : 0.486/0.7 V [p-p] switchable,
75 Ω (75% color bar, 7.5% setup)
Analog composite input (option):
BNC a 2, loop-through, 75 Ω on/off
Reference input:
BNC a 2, loop-through, 75 Ω on/off
SDI input:
BNC a 2, active through, complies with SMPTE259M-C/ITU-R
BT.656-4 standard